User manual

Something not working?

If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an

engineer when one of the following problems occurs, or to repair a fault due to incorrect use, the

callout will be charged even if requested within the guarantee period.

Problem Possible cause Solution

The drier is not working

properly

• Mains plug disconnected Plug in mains plug

• The START button has not

been depressed.

• Press START button

• No programme selected • Select programme

• Loading door open • Close loading door

• Fuse or residual current cir-

cuit breaker in fuse box

(domestic installation) faulty

• Check fuse or residual cur-

rent circuit breaker. Faults

can be eliminated by an elec-

trical engineer

The drying results are not

satisfactory

• Wrong programme selected

• Select another (time) pro-

gramme for the next drying

cycle

• Lint filter blocked • Clean lint filter

• Wrong filling quantity

• Observe recommended filling

quantity

• Laundry not sufficiently dried • Pre-dry laundry sufficiently

• Deposit on the drum inner

surfaceor on the drum ribs

• Clean drum inner surface

and drum ribs