Instruction manual

USB PORTS

At this time, the USB port offers the following functions (USB cable not included):

1. PC CAMERA – Power on camera and then plug USB cable from camera into the computer

2. USB DRIVER – With camera power OFF plug USB cable from camera into the computer, then

power the camera ON. In USB Driver mode you can review, copy and delete the media ﬁles/

data stored on the SD Memory Card in the camera.

NOTE: Keep rubber weather resistant cover/plug in place when the port is not in use to avoid damage.

EXTERNAL POWER PORTS

The Truth

Cam Ultra™ comes standard with an external power port. This is a DC JACK/2.0mm

and will accept 6-12V power sources.

Recommended:

Primos

6V Steroid Trail and Game Camera Battery Pack

NOTE: Keep rubber weather

resistant cover/plug in place

when the port is not in use to

avoid damage