Instruction manual

8
STATUS INDICATION LIGHTS
RED LIGHT ***
(on front of camera)
Lights up when the camera detects motion. After you
close camera door and are standing in front of the camera,
visibility of this light is indication that your camera is ON
and working.
TIP: Walk in front of the camera and look for the red light to illuminate when
you are detected. You can do this to verify your camera is pointing in the
correct direction.
**NEVER COVER THE RED LED LIGHT. This LED LIGHT also
doubles as the camera’s light sensor, which determines day or
night operation.
GREEN LIGHT
(next to PWR button inside camera)
Lights up when the camera is capturing and recording
media on the SD Memory Card. Also, the LCD screen will
show ‘PIC’ during this process.
NOTE: Do not remove SD Memory Card when the green light is
illuminated or blinking – this could cause you to lose all data on
memory card!
NOTE: The LCD menu will not wake up from Power Saving Mode
while the Green Status Light is illuminated/ LCD reads ‘PIC’.
Wait until after Green Light turns off and then press the POWER
BUTTON to wake up the LCD screen.
NUMBER OF FILES STORED ON SD CARD
The initial main LCD screen displays number of files ‘0000’
stored on the SD Memory Card and the battery life. For
example, ‘0015’ would indicate that any combination
of ‘fifteen’ photos, videos and/or time lapse videos are
stored in the memory.