Instruction manual

7
CAMERA IS READY TO USE - STANDBY MODE
When the camera is powered on, the LCD menu screen will automatically turn on. If menu is left
inactive (no settings changed or button pushed) for 10 seconds, menu screen will start counting
down from 15 seconds until it reaches Standby Mode.
After the 15 second countdown, the camera is active standby mode and ready to record
media according to your switch settings.
The camera and LCD menu screen can be awakened by pressing the POWER button.
NOTE: The POWER button only responds when the green LED light next to the Power button in not illuminated
and ‘PIC’ is not displayed on the screen – both of these indicate the camera is busy saving media to the SD
Memory card and the camera cannot be awakened from Standby Mode until this process is complete.
AUTO CAMERA SENSITIVITY (PIR Sensing)
This camera is equipped with auto-adjusting Passive Infrared (PIR) Sensor. There is no need to
worry about adjusting any settings for different climates or situations
PIR SENSOR
CAMERA FEATURES & OPTIONS