User's Manual

PrimosHunting|604FirstSt.,Flora,MS39071|601-879-9323|www.primos.com
Note: Primos® does not recommend transporting tail
attached to decoy in and out of the eld as tail may be
damaged or bent during this process. Always remove tail and
store in provided carry pouch to prevent damage to tail.
Note: Tail is an important component for providing proper
movementandrealisticmotionforStrayCat™Decoy.Use
caution to prevent bending or deformation of tail as it may aect
performance of decoy.
Note: When transporting or using attachment strap or wood screw
for positioning decoy, leave legs in upright locked position.
Note: Leave legs in upright locked position.
Note: Leave legs in upright locked position
ATTACHING TAIL TO DECOY HOUSING USING TRIPOD LEGS
USING ATTACHMENT STRAP
USING FOLD OUT WOOD SCREW
ATTACHING OPTIONAL LEG EXTENSIONS
Line up hex connector
on tail bottom with hex
connection on top of
decoy housing.
Detach leg from upper
portion of decoy
housing.
Detach attachment strap
from hook on decoy
housing.
Foldscrewoutof
bottom cap on decoy
housing.
Twist wood screw into
tree, branch, wood,
etc. by turning decoy
clockwise. Remove
decoy by turning in
opposite direction.
Attach strap to hook on
decoy housing.
Unfold2-piecebungee
corded leg extensions
and connect them
together.
Insert tail connector
into connection on
decoy housing so tail
hex connector is rmly
seated inside connection.
Pull leg upward so
bungee cord stretches
and once the leg is clear
of storage pocket, swing
leg down and lock into
tripod pocket.
Loop attachment strap
around branch, post, etc.
and pull strap tight.
Attach leg extensions to
bottom of the tripod legs.