User's Manual Part 2

Stand Timer:
1. Use SCROLL ▲ or ▼ to highlight Stand Timer and push SELECT.
2. Use Left/Right arrow (volume) buttons to start Stand Timer.
Theme Menu:
1. Use SCROLL ▲ or ▼ to highlight Theme Menu and push SELECT.
2. Use Left/Right arrow (volume) buttons to change Theme.
CONNECTING SPEAKER TO COMPUTER (PC & MAC COMPATIBLE).
3. Turn power on speaker and computer. Using USB cord, connect cord to USB Connection on
back of Speaker. Then connect USB cord to computer.
4. Alpha Dogg folder should automatically pop up. Simply drag and drop sounds to folders.
5. Disconnect USB from computer by following USB removal instructions on your computer.
6. Remove USB cable for Speaker.
7. Leave Speaker on and turn on Remote. May take a few seconds for Remote to download updated
information from Speaker.
8. Caller is ready for use.
POWERING UNIT OFF
Push power button on back of remote. Then push power button on back of speaker.
CARING FOR YOUR CALLER
Your caller contains sensitive electronic components that can be permanently damaged if exposed to
excessive shock or vibration. To minimize the risk of damage to your unit, avoid dropping your unit and
operating it in high-shock and high-vibration environments.
- Do not store your unit where prolonged exposure to extreme temperatures can occur, because
it can cause permanent damage.
- Do not expose to prolonged exposure to moisture. This can cause this unit to malfunction.
(Always use the rubber plugs to seal the power and USB ports)
- Never use a hard or sharp object to operate this unit or damage may result.
Cleaning the Unit: