Operation Manual

Cradle Assembly

Getting Started

A - Oval Ring (2)

B - Long Crossbars (2)

C - Short Crossbars (2)

D - Raising Bars (4)

E - Caster Wheels (4)

F - Hardware Pack

G - Clinch Screws (2 long, 3 short)

H - Large Kept Nuts (4)

I - Round Head Screws (9)

J - Round Nut Cap (4)

K - Small Kept Nuts (14)

Lay the two longer crossbars

(B) down and fit with Round

Head screw in the center.

Place center-curved crossbar

under the straight crossbar.

Round Head Screw (T) and a

nut (K).

Place casters under crossbar. Preferably, place locking wheels on the

front as shown here. Locking wheel is unlocked when flap is up (shown

left). Use the (K) nut to secure the wheels in place and the (X) washer.

Secure raising bars (D)

on base with a large

round nut (H). Note that

the raising bars are

curved inward. The

raised bars are placed

inwards.