Installation Sheet

4
Bottom View of Lantern
Care and Maintenance
Thank you for purchasing a Primo International Gas lantern. The lanterns represented in
our line offer an array of designs that gives that creative look for any surrounding our
handmade lanterns are offered in either glass or solid copper top. Optional features such as
our ornamental scroll gives that unique period effect.
Most of our lanterns are available as wall, ceiling and/or post mount. Our lanterns are
available in many different sizes to accommodate a special ambience.
Our accessories include hanging yoke cradle, decorative gooseneck, or wall bracket with
scroll.
All of our gas lanterns are equipped with a different style burner tip and orifice to give off
that special flame of light.
Periodically you need to clean the glass on your lanterns. To do this, simply open the door,
turn off the lantern valve to extinguish the flame and allow cooling for several minutes. Clean
the glass with the glass cleaner product of choice. Apply a mild soap solution such as
dishwashing liquid mixed with water to remove any dust, grime or residue from the fixture.
Occasionally, the lanterns flame may seem to have lost its shape. To correct this, place a
single edge razor blade or dental floss inside the slit of the burner tip. Rub back and forth a
few times. This will clean and remove any debris that might have distorted the flame.
To re-light the lantern, hold a long match over burner tip and turn on the fixture gas valve
shown.
If the burner does not light immediately turn gas valve to the off position and leave door
open. Wait several minutes, before repeating relighting procedure.
Your lantern will require very little maintenance over the years.
In the event that your lantern would require any replacement parts or if you have
Any questions, please call, contact or email us at the phone, address and/or web site
listed below.
Primo International, 10380 Airline Highway, Baton Rouge, LA 70816
1-800-272-8165, [e-mail]
Air Vent
Gas Inlet
¼” Air Flow