Instructions

70
User profiles
You can save various profiles (special settings, depending on
the user and the environment) which you can switch quickly,
if required.
Note
The profile with the green arrow is the active profile. If you
make any changes to one of the profiles, these selected
settings will have effect only when the profile is activated!
1. Press Menu, select User profiles and press OK.
2. Select one of the profiles and press Options.
3. Select one of the following options and press OK:
Enable: The profile is enabled with the corresponding
settings.
Adjust: Edit the settings for the selected profile. Select
one of the following menu points using and
press options. Then select Change, Edit the setting and
press OK. Once you have carried out all settings as
required, press Options, select Save and press OK.
Signal type – Define if a call shall be notified by ring
tone, only vibration, by ring tone and vibration or by
vibration and the ring tone starting after a certain time
has passed.