Installation & Assembly

Assembly Instructions
360⁰ Extension Kit 30”
Item # 33233-E3
Step 1. Line up hinge with pre-drilled pilot holes on the extension. Use a screw
driver to screw one screw in the top hole and one screw in the bottom hole.
Repeat for bottom hinge.
Step 2. Attaching to gate: Set gate and extension on level, non-carpeted surface.
Step 3. Select which side of the gate to attach extension. Align hinge holes on the
extension with the pre-drilled pilot holes in the gate. Repeat steps 1 and 2
360⁰ Degree hinge x 2 Wood screw x 8