Quick Guide

iPRECIO
®
IMS-310R Quick guide ver.1.0.0 E
17
www.iprecio.com
6. Input dose amount and duration from Step1 to create the infusion schedule. Input
the value to the each boxes and press Enter to finalize dose. The starting time and
finish time will be shown in elapsed time that accumulate the injection period. The
battery life shown in the bottom of window indicate the expected battery life which
calculated as a new battery. It may help to create an administration schedule.
Weight range should be input by maximum to minimum.
Please do not forget to finalize the data by pressing “Enter” key.
Do not refer the battery life when the pump was re-use and or re-
programming. The indicated battery life was calculated from the battery
capacity as a new one.
7. When ditto the same schedule, the use the “Repeat Setting”. Check the
“Repeat Start” box for start of repeated schedule step then check the
“Repeat End” box for termination ditto schedule. For number of cycle,
input “Times” of “Repeat Start” column and finalize to press Enter key.
8. After all information input, press OK then new administration profile will
be registered in the Infusion Profile list.