Quick Guide

iPRECIO
®
IMS-310R Quick guide ver.1.0.0 E
15
www.iprecio.com
Change Language
1. Click Language menu
2. Select language from pull down menu, then click Change.
3. Now the language has been changed.
Network Setting
1. Click network setting menu in tab.
2. Input default IP address(192.168.1.10) in the Host IP address column for the
data com unit.
3. Click “connect”
4. After confirm “Status: connected”, then close the window.
5. If the status column shows “disconnected”, check the IP address setting. Please
refer the “TCP/IP connection between data com unit and control PC”.
Create Infusion Profile
Administration protocol that perform in vivo pump of a subject animal of experiments,
it is required create in the management software in advance and store as a
“administration protocol”. The administration profile should be determined by each
group of dosing preparation and concentrations and assign administration schedule.
1. Open Administration profile menu by clicking.