User`s manual

Note that the Thermal CD Printer attaches to the left side of the
printer and that the Output Bin is located in a different spot
due to the location of the Thermal CD Printer. When you first
power-up the Duplicator, it will automatically do a search for
where the Input and Output Bins are located and from then on
will know where to pick and place discs.
When using the Thermal CD Printer, you will also need to
attach a Tray Support Bracket to the top cabinet of the
Duplicator. Follow the instructions packed with the optional
Printer Stand for the Thermal CD Printer.
Rear Panel
This illustration shows the input ports found on the rear panel
of the Duplicator:
The FireWire (IEEE 1394) Port is for connection to your PC’s
internal FireWire card.
The Control Port is connected to COM1 (or COM2 or COM3)
of your PC with a serial cable, included with your Duplicator.
The Printer Control Port is connected to the mini-DIN plug on
the rear panel of a Thermal CD Printer or an Ink-Jet CD Printer
with a mini-DIN cable included with the optional printer
stand.
The Power Input Port is for connection to the +30VDC Power
Adapter included with your Duplicator.
Getting Started 5
FireWire Port
510231.qxd 10/2/03 9:14 AM Page 5
TOC
INDEX