User`s manual

C. IDENTIFYING THE PARTS
Front Panel and Top
This illustration shows the Duplicator, its Control Panel,
Buttons, LED indicator lights, Input and Output Bins and other
components. An optional ink-jet CD printer is shown with the
unit so that you can see where it is attached:
CD Recorder 1 is the first drive the Duplicator loads and
unloads as discs are copied
CD Recorder 2 is only available on the Optical Disc
Duplicator Pro
The Robotic Arm transports discs from the Input Bin, to the
CD Recorder, to the printer, and finally to the Output Bin
The CD Tray Button manually opens or closes the CD Tray. In
normal operation, the in/out movement of the CD Tray is
controlled automatically and this button is not used.
The Control Panel contains LED Status Lights and Buttons to
manually control operation of the duplicator.
Getting Started 3
Ink Jet
CD Printer
Robotic
Arm
Input Bin
CD Recorder Tray
CD Recorder
Tray Button
CD Recorder 1
CD Recorder 2
(Pro Model Only)
LED Status Light
Pick Button
Sequence Button
Pause Button
Control
Panel
Output Bin
CD Printer Tray
Reject Area
510231.qxd 10/2/03 9:14 AM Page 3
TOC
INDEX