User`s manual

A. CHOOSING A GOOD LOCATION
• Place the Duplicator in a location with adequate air
circulation to prevent internal heat build up. If you will be
attaching an optional printer, you'll need a table-top with
at least 30" (76cm) of depth for adequate clearance.
• Do not place the duplicator near heat sources such as
radiators or air ducts, or in a place subject to direct sun-
light, excessive dust, mechanical vibration or shock.
• Allow for adequate clearance in front of the printer to
accommodate the length of the unit with its recorder's CD
Tray open. You will also need an area in front of the unit
for rejected discs to fall.
B. UNPACKING AND INSPECTION
While unpacking your Duplicator, inspect the carton to ensure
that no damage has occurred during shipping. Make sure that
all supplied accessories are included with your unit. The
following items should be included:
• Duplicator
• Gray Plastic Input and Output Bins
• Power Adapter and Power Cord
• Serial Control Port Cable
• FireWire (IEEE1394) Interface Cable
• PrimoDVD Application Software CD-R
• Warranty Statement and Registration Card
• This Operator's Manual, Quick Start Guide and Other
Printed Information
Save the carton and packing materials. They will come in
handy later if you ever need to transport the Duplicator
and/or any of its parts and accessories.
2 Getting Started
510231.qxd 10/2/03 9:14 AM Page 2
TOC
INDEX