User`s manual

Interpreting the Duplicator’s LED Status Lights 31
Section 4: Interpreting the Duplicator's
LED Status Lights
The LED Status Lights are located on the front Control Panel.
They can tell you a lot about what is happening at any given
moment with the Duplicator, including a number of error
conditions. To accurately interpret what is meant when the
lights are on, off, or flashing, please refer to the following chart:
A. POWER LED
Status Condition
Off No Power. Plug in Power Adapter.
On Solid Power is ON. This is the Duplicator's normal
"waiting" mode.
Flashing Power is ON, but an error condition exists:
a. Didn't pick up a disc
b. Dropped a disc
c. Discs out
d. Robotic arm stalled; probably hit
something while moving. Press any button
on Control Panel to re-try.
B. PAUSE LED
Status Condition
Off Normal "waiting" mode
On Solid Duplicator is paused.
Flashing Duplicator is busy; i.e. motors are running,
printer is printing, etc.
Power LED
Pause LED
510231.qxd 10/2/03 9:15 AM Page 31
TOC
INDEX