User`s manual

22 Hardware and Software Set-Up and Testing
3. In the drop-down menu, go to Services.
4. Click on Check Communications. You will get a dialog box
saying "Communication OK. System Idle." If you don't,
check that all cables are connected securely. Or, change the
serial cable from COM1 on your PC to COM2 or COM3
and change the setting in the Control Port drop down
menu. Try again until you get the "Communication OK"
message.
5. Click OK to get back to the main screen.
510231.qxd 10/2/03 9:15 AM Page 22
TOC
INDEX