User`s manual

Hardware and Software Set-Up and Testing 21
F. SOFTWARE TEST
The final set-up step before starting your first job is to test the
entire hardware/software configuration. This will confirm
that the hardware, software and your PC are all
communicating properly with each other properly. Follow this
procedure:
1. Launch the software from your Windows Desktop or
program menu. The main Application Window will
appear. Single click on the Duplicator drive in the list of
available drives on the lefthand side of the screen to high
light it.
2. From the main Application Window, click on Robotics.
510231.qxd 10/2/03 9:15 AM Page 21
TOC
INDEX