User`s manual

12 Hardware and Software Set-Up and Testing

7. Connect the 6-pin mini-DIN cable (included with the

optional Printer Stand) to the Printer Control Port on the

rear panel of the Duplicator. Do not connect the other end

yet. You need to attach the Printer Stand and mount the

printer first.

8. Attach the optional printer stand (required for a printer

installation) to the Duplicator by locating the connecting

tabs and inserting them into the slots on the rear panel of

the Duplicator. For the Ink-Jet CD Printer, the stand is

attached so that it is on the left side of the Duplicator.

510231.qxd 5/17/2004 8:45 AM Page 12

TOC

INDEX