User guide

Manual (rev 16) for the DCMburner 4.x.x software Tuesday, July 16, 2013

Setup – SOP Transfer

In some cases it’s needed to add SOP Classes, for instance an SOP Class that’s related to the brand

of the medical modality. This module gives you the opportunity to add not common Classes.

SOP Class, a Service-Object Pair (SOP) Class is defined by the union of an Information Object

Definition (IOD) and a DICOM Service Elements (DIMSE). The SOP Class definition contains the rules

and semantics which may restrict the use of the services in the DIMSE Service Group or the Attributes

of the IOD.

Transfer Syntax, is the language used in DICOM to describe the DICOM file format and the network

transfer methods.

 SOP Class Name, here you can add, delete or edit the SOP Classes. Or select or unselect

existing Classes.

 Transfer Syntax Name, the most common Dicom Transfer are available, you can select the

one that is needed according you Dicom modality. In case you have select the STD-GEN-

CD/DVD RAM you best select the LittleEndianExplicit because the Dicom Dir is using this

format.

Setup – Advanced options

This section describes how you can set the password and automatically close DCMburner or

Shutdown Windows.

 If “Password protected” is selected then you have to fill-in your password when starting

DCMburner. Also the Setup is now protected with a password.

 Shutdown Windows, if select then Windows will shutdown in a proper way at the selected

time.

 Close DCMburner, if select then DCMburner will close in a proper way at the selected time.