User guide

Manual (rev 16) for the DCMburner 4.x.x software Tuesday, July 16, 2013

Test the DCMburner Web module

 Go to the link “Test Webserver” in the Setup – Webmodule or start you local web browser and

go to http://127.0.0.1/dicom/login.php If you want to test this from another system then type

“http://IP_Address_of_DCMburner/dicom/login.php”

 If everything is configured properly you will see the screen below.

 Fill-in your Username and Password and press the “Login” button.

 Press the “Submit” button to get the Studies from DCMburner. You can fill-in the patient Name

or ID or use just a part of it. Also you can select the AE-Title where the study is send to.

 If you want to create a Study on CD/DVD, press the “Burn” button.

 The “Job List” shows the Studies that already burned or in progress. This page is be refreshed

every 10 seconds.

 For accessing the DCMburner web module on another system make sure that the firewall is

allowing the port 80. The web module is available on

“http://IP_Address_of_DCMburner/dicom/login.php”.