User guide
Manual (rev 16) for the DCMburner 4.x.x software Tuesday, July 16, 2013
26
After you finished the WampServer 2 setup, you have to start the Wamp Service.
Go to the systray and click left mouse button on the icon and select “Start All Services” and
Put Online.
Make a shortcut of the “C:\wamp\wampmanager.exe” and copy this to the StartUp folder.
Setup the Web module
Location WAMPserver, normally the WampServer 2 is installed in the “c:\wamp” folder. If not,
select the correct one.
Make a choice for the Username and Password. You will need it later to log into the
DCMburner web module. The Password is not needed.
Check the “Activate WAMP server (webserver)” and save.
The warning form let you know that the database is cleared. This is needed because only the
new studies are directly send to the webserver module. Click yes to activate. The program is
closed now. Restart DCMburner and go to the Setup – Webmodule again.
Your system is now ready for the DCMburner web module.