User guide

Manual (rev 16) for the DCMburner 4.x.x software Tuesday, July 16, 2013
16
Setup – Publisher - “Primera”
This section describes the settings for the Primera Publishers.
 Publisher is already filled in. Otherwise the Job Folder is not correct.
 Job Folder, standard the location is “c:\PTBurnJobs\”. If this is not the case then change this
location by pressing the right button and choose the write folder.
 If you are planning to write standard more than one copy then select how many copies you
prefer.
 Media Type can be set to CD or DVDR
 The standard format how a disc is written on the media is JOLIET. This is the most common to
use. Use the ISOLEVEL1 if the STD-GEN CD/DVD RAM is selected in the DICOM Server
part. Only if certain hardware has problems reading the ISO format you can change this.
 Possible FileSystem:
o ISOLEVEL1 – for an ISO 9660 Level 1 compliant CD with folder and file names in the 8+3 format using only
the A-:-Z, 0-:-9 and “_” character set.
o ISOLEVEL2 – for and ISO 9660 Level 2 compliant CD (DOS OEM characters). Filenames are 8+3 format
(use ISOLEVEL3 for long filename support).
o ISOLEVEL3 – for an ISO 9660 Level 3 compliant CD (DOS OEM characters, long file names)
o JOLIET – for a Microsoft Joliet compliant CD with filenames up to 106 characters.
o ISOLEVEL1+JOLIET – for an ISO 9660 Level 1 with Joliet CD.
o ISOLEVEL2+JOLIET – for an ISO 9660 Level 2 with Joliet CD.
o ISOLEVEL3+JOLIET – for an ISO 9660 Level 3 with Joliet CD.
o UDF – for a UDF 1.02 bridge file system
o UDF201 – for a UDF 2.01 bridge file system
o UDF250 – for a UDF 2.50 bridge file system
o UDF260 – for a UDF 2.60 bridge file system
 To verify the Disc content select “YES” otherwise leave it.
 Burn Speed CD, if 0 is selected the standard burn speed is used. Select only if the CD writer
gives some errors when burning the CD.
 Burn Speed DVD, if 0 is selected the standard burn speed is used. Select only if the DVD
writer gives some errors when burning the DVD.
 Check Disc in BIN, if selected then DCMburner will gives the Primera Publisher the command
to check the Disc’s that are available in the BIN’s. This is done every time DCMburner starts.