User`s manual

3. The Recorder Tray then automatically shuts. Robotic Disc
Transporter will automatically check the Input Bin to make
certain that only one disc was picked. The software checks
the disc to make sure it is blank and then burns header
information to the disc.
4. If the header information burn was successful the Robotic
Arm will pick the disc from the recorder and place it into
the Printer.
5. Backup job information is then printed onto the disc. The
title you choose is printed followed by a dash and the
number this disc is in the backup set. For example the first
disc in the backup set might be named 1-My Backup.
6. The Robotic Arm then moves the printed disc back into the
recorder to write the files contained on the source volume.
7. Once the writing is complete the disc is moved to the
output bin.
Getting Started 5
510934.qxd 10/28/2005 12:13 PM Page 5
INDEX
TOC