User`s manual

The Power Button turns the Optivault's power OFF if pressed
and held for five seconds. Press it quickly to turn power back
on. When already powered on quickly pressing the power
button will move the arm to the right or the middle to allow
access to the recorder drive or the bins.
When the front cover is opened, the Ink Cartridge Button is
used to position the Cartridge Carrier for easy ink cartridge
replacement. When the front cover is closed, pressing the Ink
Cartridge button will open or close the Printer Tray. (Must
override cover lock sensor to simulate cover closed condition)
The Input/Output Bins are situated under the top cover of the
Optivault. The bins will hold up to 25 discs. The right-side bin
is the Input Bin for blank media; the left-side bin is the Output
Bin for finished discs. Only a total of 25 discs can be loaded
into the input bin, output bin and drive at any one time.
The Reject Area is where discs are dropped if the header
information is not burned correctly or if the minimum size
threshold is not met. (100MB) . The discs slide down the ramp
out in front of your Optivault.
The Front Cover is a durable plastic cover that will protect the
Optivault from dust and interference.
The Ink Cartridge Carrier holds both a color ink cartridge
(left-side pen) and a monochrome ink cartridge (right-side pen).
Rear Panel
This illustration shows the input ports found on the rear panel
of the OptiVault:
The USB 2.0 Interface is connected to an open USB 2.0 port on
your PC with the USB 2.0 cable, included with your Optivault.
The Power Input Port connects to the included 100V~240V 12V
switching power supply.
Getting Started 3
USB 2.0 Port Power Input Port
510934.qxd 10/28/2005 12:13 PM Page 3
INDEX
TOC