User`s manual

Interpreting the OptiVault’s Indicator Lights 55
Section 5: Interpreting the
Optivault's Indicator Lights
The Power and Busy LED indicator lights located on the top of
the Optivault can tell you a lot about what is happening inside
the Optivault. To accurately interpret what it means when these
lights are on, off, or flashing, please refer to the following:
Ink Cartridge
Power LED LED Optivault
on solid off Cover is open
on solid on solid Is ready to receive job.
both lights are blinking Waiting for a cartridge to
alternately with one another be installed and the lid to
be closed. (See section 2-E).
on solid flashing rapidly The printer tray or ink
cartridge carrier has
stalled. Open and close the
cover to retry the operation.
flashing rapidly on solid The Optivault has a cartridge
problem. Check to make
certain that the cartridges are
installed correctly and that the
bar code labels on the
underside of the cartridge are
not damaged.
repeating pattern of both lights This indicates low ink warning.
flashing in unison, then one If the left light stays solid after
light momentarily on solid. the flash, the Color cartridge is
low. If the right light stays on
after the flash, the Black
Monochrome cartridge should
be replaced.
510934.qxd 10/28/2005 12:13 PM Page 55
INDEX
TOC