User`s manual

Using Retrospect 25
B. RESTORING A BACKUP
In the event that you need to restore a backup follow these
steps:
1. Locate all of backup discs in a backup set. Discs will be
titled according to the following example. If you have 5
discs in your backup set the title of each will be 1-My
Backup, 2-My Backup, 3-My Backup, 4-My Backup and 5-
My Backup. The final disc in the backup set may already
be in the recorder drive. If you store your backup discs
offsite load them into the left bin of the backup device in
this order:
5-My Backup or the last disc in the backup set should be
placed in the recorder drive of the Optivault.
Note: Whenever you move or remove media follow the reloading
procedure in section 2D.
2. Open the Software. Choose Restore from the navigation
menu on the left.
4-My Backup
3-My Backup
2-My Backup
1-My Backup
510934.qxd 10/28/2005 12:13 PM Page 25
INDEX
TOC