Setup guide

ElitePro Setup Guide

Below Copies is an option called Method. The “slider bar” allows you to select your recording

speed. The maximum possible speed will depend upon the model of recorder in your unit and

the type of media you are using. Since nearly all the CDR and DVDR media on the market

today will burn at 24X and 2X respectively, we suggest those as initial recording speeds. Once

you successfully complete your first job, you can try to burn at higher speeds. Results will vary

depending on which brand and type of media you use.

Burn Speed Selector

Once you have found a burning speed that works well with your media, you can make that

speed the default. To do this, click on the Tools menu located at the top of the DiscJuggler

window. Then click on the Options menu. Next, click on the Defaults tab if it is not already

selected. You will see the following window.

Here, you can change the default write

speed for CDs and DVDs to the speeds

that work best with your media.