Setup guide

Elite Setup Guide
5
Customer Minimum Hardware and Software Requirements
Desktop systems change rapidly and the Elite was designed for use with PC systems that are
relatively new models. It is recommended that you operate your new Elite with the best
possible hardware. This will ensure you a reco rding and printing system that will operate
smoothly and efficiently.
The following are minimum requirements for the PC to which the Elite is to be connected.
These are very important. Due to the high speed of the Writers, sufficient memory and FAST
hard drives are required.
Minimum PC Requirements:
1 - 2 Drive Elite 3 - 4 Drive Elite
1.0 GHZ Celeron® Processor or equivalent. 1.7 GHZ Celeron® Processor or equivalent.
256 MB RAM. 512 MB RAM.
7200 RPM 20 GB hard drive with 50% free
space for CDR unit.
7200 RPM 20 GB hard drive with 50% free
space for CDR unit.
7200 RPM 40 GB hard drive with 70% free
space for DVDR unit
7200 RPM 40 GB hard drive with 70% free
space for DVDR unit
Free External Com Port (for RS232 to Elite) Free External Com Port (for RS232 to Elite)
Free PCI Slot (for FireWire® card) Free PCI Slot (for FireWire® card)
Free Parallel Connection (for CD printer) Free Parallel Connection (for CD printer)
Software Requirements:
Windows 2000 or Windows XP