Setup guide

Elite Setup Guide

Using Drive Assigner

If Your Unit is trying to use CD/DVD Recorders on your PC, try the following:

Due to the fact that DiscJuggler is an open platform that looks at the entire PC system for

Follow this procedure to eliminate this occurrence:

Select Start, All Programs, Padus Di

scJuggler, and click on Drive Assigner.

DiscJuggler will review the system and display the devices that it has located. Select the

writers that are located in the Elite unit by clicking on the boxes beside the drives. Also,

select

the appropriate printing port for DiscJuggler to use

when printing CD labels.

Click on

Update and then OK when finished with your selection. This process will assign only the

recorders of the Elite to DiscJuggler and will set which port the software uses to communicate

with your CD printer. The assignment will rema

in set unless you run the Drive Assigner and

change your settings.

If you have a Autograph VI and get an error message and cannot print after a CD is

placed in the printer,

please read the above paragraph for details on how to select

the proper USB printing port for the printer.