Setup guide

Elite Setup Guide
28
STEP 16
DESIGN PRINT IMAGE (LABEL) FOR MEDIA
Note: You must be using an Autograph VI CD Printer in the following steps. If
you are using another printer refer to doc
umentation that includes your printer.
Next you have to prepare a print image that can be used by the DiscJuggler software to print
text or graphics on top of the media. To do this you will have to use the Discus labeling
software provide with the Elite. Minimize the DiscJuggler software and on the Desktop, click
on the Discus CD Labeling ICON. The Discus software will open.
When the Discus screen below opens, click on
CD Label
.