Setup guide

Elite Setup Guide
27
Below Copies is an option called Method
speed. The maximum possible speed will depend upon the model of recorder in your unit and
the type of media you are using. Since nearly all the CDR and DVDR media on the market
today will burn at 24X and 2X respectively, we suggest those as the initial default recording
speeds. Once you successfully complete your first job, you can try to burn at higher speeds.
Results will vary depending on which brand and type of media you use.
Burn Speed Selector
Once you have found a burning speed that works well with your media, you can make that
speed the default. To do this, click on the Tools menu located at the top of the DiscJuggler
window. Then click on the Options menu. Next, click on the Defaults tab if it is not already
selected. You will see the following window.
Here, you can change the default write
speed for CDs and DVDs to the speeds
that work best with your media.