Setup guide

Elite Setup Guide

Step 8

Installation of Startup CDR

automatically open to a setup screen.

Note: If your CDROM drive is not set to autoplay, open

the CDROM and click on click_here.htm

Once the Installation CDR is deployed, you will have several options displayed on the screen.

Each of these options are briefly outlined on the following pages.

Install 1-2 Drive CDR/DVDR Software

Install 3-4 Drive CDR/DVDR Software

Installs the following three programs:

DiscJuggler Pro 4.1 Local Batch Mode Duplication from any source.

autoloading-printing process.

ImageJuggler 4.1 Local FAST Duplicate and Print Mode with

asynchronously operation of the drives and the printer. This mode is best

used for medium to high volume production tasks. The production output

will be significantly higher than the batch mode. To use the ImageJuggler

program, you

must

first create an image of your CD using DiscJuggler

Pro. The ImageJuggler should only be used by the experienced

operators.

Network Console Icon. This allows login and setup of the Network Server

Operating Platform. This package is set to login automatically upon

opening the package. The console ICON will appear in the lower right

desktop area when it is deployed. This package should be operational at

all times to service requests from the clients on your network. This service

of the client work will not impact the local jobs from either DiscJuggler Pro

or ImageJuggler.

Install AutoLoader Command Console Program

The ACC (Autoloader Control Console) provides a graphical interface

allowing you to troubleshoot, update, and adjust your Elite unit. This is a

useful utility for setup and maintenance of the Elite. You may have to

install the .NET Framework, also located on this CD, before installing this

software.