Setup guide

Elite Setup Guide
11
Step 6
Installation and Connection of AC Power, FireWire® and Serial Link
Plug the FireWire® and Serial Cable into each of their identified connections located on the
rear of the Elite unit. These connections are identical to the common connections of standard
computers. If you have multiple recorders, then short FireWire® cables are used to link each
Arrange your PC hardware on the same table as the Elite unit. Connect the other ends of the
FireWire® and Serial Cables to their respective connections on your PC. Plug the power cord
into the power supply of the Elite, also located on the rear side. Plug into a standard 115VAC
outlet.
It is recommended to plug these components into a common plug strip with AC filtering, as is
common with most high-end computers. Also if the unit is to be located in an area where the
utility or power company experiences frequent outages, utilizing a UPS is strongly
recommended .
Rear View of FireWire® Connections
Loader Serial Connection
Drive FireWire® Connection
Printer Control Connection AC Power Connection