User`s manual

62 Troubleshooting and Maintenance
5. Clean the Maintenance Station. Power off the printer! Clean the
maintenance station located on the right side of the print area.
This includes the rubber cartridge nozzle cap and the plastic
squeegee. Under normal use this can become dirty with ink.
Clean with rubbing alcohol and a paper towel.
6. Color Matching. Change your Color Matching setting to
Graphics or Photos via the printer driver preferences. See Section
4F.
7. Cartridge Setting. Change the cartridge setting in the driver. Try
Color + Black or Color only. To change the cartridge setting,
right click on the printer in the Printers and Faxes area - choose
preferences -click cartridge - set it to Color + Black or Color.
Color only will still print black, but will use the color cartridge
to print it. We recommend "Color" only for the best possible
quality on photographic images with small amounts of black. If
your image has large areas of black text, graphics or barcodes,
we recommend Color + Black for the best quality.
8. Media. Make sure your label stock is inkjet printable. Many
thermal label stocks look the same as inkjet but do not allow the
ink to soak into the surface of the media.
Maintenance
Station
WARNING: Hazardous
Moving Parts. Keep
Fingers and Other
Body Parts Away.