User`s manual

44 Printing from a Mac
Present Labels – No (Use with Rewinder). In this mode the label
stock does not move after the last label is printed. This means that
part of the last label printed is still in the printer. This should be
used only if you have a label Rewinder attached. To retrieve the
final label you must press the Load/Feed button on the printer
control panel.
Set Ink Saturation
This option controls the amount of ink used when printing an
image. The default is 100%, which will provide the most accurate
color matching. If the ink is not drying fast enough or is bleeding
you can decrease the Ink Saturation to lessen the amount of ink that
is applied to the label. To locate the Ink Saturation setting, click on
Info in the Color Label 900 Utility.
To change the saturation level, enter the desired value and then
click Set.