User`s manual

Printing from a Mac 43
Continuous. (Sensor off.) If you have continuous stock with no die-
cut, reflective mark or holes, set the Sensor Type to Continuous.
This will turn off the stock sensor. In this mode there is no way to
set the print starting position. The printer will simply start printing
the first label and print each subsequent label immediately after the
previous. To produce a gap between prints simply add the desired
amount of white space to the end of the label being printed.
Set the Output Mode
Toggle the Output mode to set whether or not the last label printed
will be presented or left inside the printer. To adjust the Output
Mode, open the Printer Utility by going to Apple Icon – System
Preferences – Print and Fax (Mac 10.5 and 10.6), Print and Scan
(Mac 10.7 and 10.8). Click on the Color Label 900 and Select Open
Print Queue. Select Setup – Utility – Open Utility. Select Alignment
– Output Mode. Select the Output Mode by clicking on the
corresponding graphic.
Present Labels – Yes (Default). This setting will cause the printer to
feed the last labels printed forward so that it and the previous
printed labels can be torn off using the tear bar. If no other jobs are
sent to the printer within one second after the last label has printed,
the last printed label will present for tear off.