User`s manual

66 Maintenance and Troubleshooting
• With the Publisher turned on, press the
Cartridge Button
• While holding the Cartridge Button, press the Power
Button until the robotics start to move.
• Release both buttons
• To stop the test, wait until the disc has moved to the
Output Bin and press the Power Button.
C. PC SOFTWARE TEST
This will confirm that the hardware, software and your PC are
all communicating properly with each other properly. Follow
the procedures listed on the following pages.
1. Launch the software from your Windows Desktop or
program menu. The main Application Window will
appear. Select the Publisher Drive by clicking on its icon
on the left hand side of the screen.
2. From the main Application Window, click on Robotics.
3. In the drop-down menu, go to Options.
4. Click on Check Communications. You will see a dialog
box stating, "Communication OK. System Idle." If you do
not see this, make sure that all cables are connected
securely.
Select the
Publisher Drive
510951new.qxd 5/8/2006 10:51 AM Page 66
TOC
INDEX