User`s manual

36 Creating Discs on a PC
Step 1 - Select File - New Job - Disc-to-Disc Copy or Select Disc
to Disc Copy from the Primo Starter Window. A copy job setup
panel will be created in the job setup window.
Step 2 - Select the drive you will use for the reader: right-click
on the desired drive (listed in the drive status window) and
choose Select/Deselect as Reader from the menu. A bluish
green arrow pointing to the right indicates a selected reader
drive for a job.
Drive configuration with reader set as computer CD/DVD drive
Drive configuration with reader set as Publisher drive - Recommended
Step 3 - Select the recorder(s) that will record this job by
double clicking the drive in the drive status window. A red
arrow pointing to the left indicates a selected recorder drive.
(This selection may already automatically be made for you by
the software)
Step 4 - Select the number of copies and the recording speed.
Step 5 - Check the print box if you want to print a label on the
disk. Type the full path and name of your image file into the
box, or click on the Browse button to open a standard
Windows Open dialog to locate the file. If you have not yet
created a label to print on the disc click on the SureThing
button to open SureThing and create a label. (Refer to Section
3-B for Instructions on how to create a label) Once you close
SureThing. The label file will automatically be associated with
your job.
510951new.qxd 5/8/2006 10:50 AM Page 36
TOC
INDEX