User`s manual

Creating Discs on a PC 35
E. USING KIOSK MODE
Kiosk Mode allows you to use both of Publisher's Bins as
input, doubling your disc capacity from 50 discs to 100 discs.
In this mode, the finished discs will be deposited out through
the front "reject area" of the Publisher. In Kiosk mode all discs
would be ejected in this manner. Rejects can be identified in the
stack because they will not be printed in the same manner as
successfully recorded discs. To install the kiosk kit refer to the
Kiosk Kit manual. Instructions for use are below.
Kiosk mode is enabled as follows:
1. In PrimoDVD 2.1 click Robotics then Options from the
main menu.
2. In the Options dialog box, check the option labeled Enable
Kiosk Mode.
3. If you would like the Publisher to physically print the
word "Reject" on rejected discs, select the Print "Reject"
option. Otherwise, rejected discs will simply be ejected
with no printing at all.
F. COPYING A CD OR DVD
Now, you're ready to start an actual recording job. In this
example, we'll perform a simple disc to disc copy. More
detailed information regarding other types of jobs (data discs,
Audio CD, etc.) can be found in the Primo DVD Help files
under the Help Menu - Get Help.
Disc to Disc copy can be used to copy any CD or DVD master.
This job type reads the master disc from a specified CD/DVD
drive on your system to the hard drive of your computer.
(This assumes you have checked "Make a temporary image on
hard drive and copy from there") The master is stored in the
Primo Global Image format (*.gi) in a temporary location on
your computer. Primo uses this temporary file to make all
subsequent copies that are requested. The master disc is read
only once to create the initial temporary GI file.
Disc to Disc copy is Recommended for all CD or DVD types
(Audio CD, Data CD, Software Install Disc, Video CD, DVD,
DVD-ROM, etc.).
510951new.qxd 5/8/2006 10:50 AM Page 35
TOC
INDEX