User`s manual

12 Hardware and Software Setup
The driver will appear as shown below. To manually add the
driver click the + button.
Step 4: Installing the Ink Car tridge
• With the cover open, press the Power/Ink Button to move
the Ink Cartridge Carrier to the load position.
• Open the cartridge cover by pressing down on the tab.
• Remove the ink cartridge from its packaging.
• Slowly remove the tape covering the cartridge's
print head.
DO NOT TOUCH THE COPPER AREA!
510963.qxd 11/2/2009 12:18 PM Page 12
TOC
INDEX