User`s manual

3. The Color Sign
Printer Setup screen
appears. Change the
options as follows:
Paper Size
Click on the Paper Size down arrow. A list of paper
size selections will appear. Select the paper size
option that matches the print media size currently
installed in the printer. See Section 4-E and 4-I for
additional paper size information.
Ribbon Type
Click on the Ribbon Type down arrow. A list of
ribbon type options will appear. Select the option
appropriate for the ribbon type currently installed
in the printer. The following table explains each of
these options. See Section 4-B for additional ribbon
information.
36
Monochrome Wax Select if using the monochrome black wax thermal ribbon.
3 Color Wax Select if using the 4-color wax thermal ribbon and wish to print
with only the first three yellow, magenta, and cyan color
panels. Skipping the black panel increases print speed but will
produce a ÒcompositeÓ black instead of a ÒtrueÓ black.
4 Color Wax Select if using the 4-color wax thermal ribbon.
Monochrome
Dye Sub This ribbon type is currently not available.
3 Color Dye Sub Select if using the 4-color dye-sublimation ribbon and wish to
print with only the first three yellow, magenta, and cyan color
panels. Skipping the black panel increases print speed but will
produce a ÒcompositeÓ black instead of a ÒtrueÓ black.
4 Color Dye Sub Select if using the 4-color dye-sublimation ribbon.
3 Color Dye Sub w/O Select if using the 3-color FotoShield dye-sublimation ribbon
with overlay.
Monochrome Resin Select if using a spot-color resin ribbon to print a single or
multi-spot-color sign. See Section 9-D or 9-E for more
information on this printing process.