User`s manual

NOTE
Before installing updated printer driver versions,
always delete the existing printer driver version from
your system. To do this, simply select the printer driver
icon from within the Printers folder, and press the
Delete key.
Windows 3.1x
To install the GDI printer driver into Windows
3.1x, refer to the following:
1. After starting Windows, go to the Main
program group and select Control Panel.
2. From the Control Panel, select Printers.
3. Select Use Print Manager from the bottom left
of the Printers window.
4. Select the Add>> button.
5. Highlight the Install Unlisted or Updated
Printer option from List of Printers.
6. Select the Install button.
7. Insert the supplied Printer Driver diskette into
your computerÕs disk drive. If you insert the
diskette in a drive other than the A: drive
displayed in the Install Driver dialog box, you
must change the drive designation. Select the OK
button.
8. ÒColor Sign PrinterÓ should now be listed in
the Add Unlisted or Updated Printer dialog box.
Select the OK button. Your PCÕs disk drive will
now load the printer driver. Depending upon your
computer, loading will take about 10 to 20 seconds.
9. Select the Set As Default Printer button in the
Printers window. The Color Sign Printer has now
been selected as your default (main) printer. If you
wish to use another printer later, you must de-
select the Color Sign Printer and switch back to the
other printerÕs driver.
10. Finally, select the Connect button. Check that
the box called Fast Printing Direct to Port is
selected. Then, increase the Transmission retry
value from 45 to 900. Click on OK and close out of
the Printers window. See Part E of this section for
information on printer driver settings and options.
29