User`s manual

Ink Cartridges and Printable CDs 5
2. Remove the color ink cartridge from its packaging.
3. Slowly remove the tape covering the cartridge’s printhead,
being careful to avoid damaging or removing the barcode
label on the underside of the cartridge.
DO NOT TOUCH THE COPPER AREA!
4. Press and release the Ink Cartridge button to move the
carrier to the load position.
5. Insert the color ink cartridge into the left cartridge carrier
position, copper end first.
6. Push the cartridge back until it snaps into place.
7. Repeat steps 2 through 6 for the black cartridge, placing it
in the right cartridge carrier position.
8. Close the printer’s front cover. If you leave the door open,
ambient light can interfere with proper cartridge
initialization.
9. Press and release the Ink Cartridge button again to reset
the cartridge carrier.
NOTE: When changing to subsequent new cartridges, refer to Section E.
510119.qxd 1/23/2004 9:11 AM Page 5
TOC
INDEX