User Manual
Troubleshooting and Maintenance 65
2. Clean the Copper Contacts. Ink over spray can build up
inside the printer over time causing interrupted electrical
signals. Remove the print head and clean the copper
contacts on the print head carrier and the print head.
(Area 1, 2 and 4 below). Do not clean the print nozzles! (Area 3).
3. Clean the Print Head.
DO NOT touch the print head nozzles with a tissue or paper
towel. This can damage the nozzles! This may be different that
previous printers. Instead used the methods described below:
1. Open PTStatus monitor.
2. Click Clean print head on the Cartridge Utilities Tab
(second tab).
Area 1 & 2
3
4
Figure A
TOC
INDEX