User Manual

60 Troubleshooting and Maintenance
5. Clean the Maintenance Station. Clean the maintenance
station located on the right side of the print area. This
includes the rubber cartridge nozzle cap and the plastic
squeegee. Under normal use this can become dirty with
ink. Clean with rubbing alcohol and a paper towel.
6. Color Matching. Change your Color Matching setting to
Graphics or Photos via the printer driver preferences. See
Section 4F.
7. Cartridge Setting. Change the cartridge setting in the
driver. Try Color + Black or Color only. To change the
cartridge setting, right click on the printer in the Printers
and Faxes area - choose preferences -click cartridge - set it
to Color + Black or Color. Color only will still print black,
but will use the color cartridge to print it. We recommend
"Color" only for the best possible quality on photographic
images with small amounts of black. If your image has
large areas of black text, graphics or barcodes, we
recommend Color + Black for the best quality.
8. Media. Make sure your label stock is inkjet printable.
Many thermal label stocks look the same as inkjet but do
not allow the ink to soak into the surface of the media.
Maintenance
Station
TOC
INDEX