User Manual

Printing from a PC 33

TOF. Decrease the Top of form by 10. This will cause the

printer to start printing before the label and ensure a fully

printed label.

Note: It is best to over bleed as little as possible to avoid excess ink on the

label backing. Also, over bleeding too much will cause the printer to

skip labels. This is because the printer stops printing too late to sense

the next label.

G. PRINTER DRIVER SETTINGS

Once the printer driver has been successfully installed, you will

need to setup the driver with the appropriate print options.

Refer to the following steps to change or verify your default

printer driver preferences. These settings will apply to all new

designs created in BarTender or other programs after the

preferences were changed. Existing labels saved in BarTender

will not be affected since the preferences are saved with the

label. To change these preferences you will have to change

printer preferences through BarTender. (File Menu - Printer

Settings)

Actual Label Stock

Size = 2” x 2”

Over Bleed Page Size

2.1” x 2.1” (.1 Inch)

Decrease TOF by 10

Decrease Left Margin

Offset by 12

TOC

INDEX