Owner`s manual

15
Connections and Setup
4. Press the▼or▲ button to select Time Zone, then
press OK button.
5. Press the▼or▲ button to select Daylight Saving,
then press OK button.
6. Press the▼or▲ button to select television signal,
then press OK button.
7. Press the OK button to finish the Channel scan.
8. Change Channel by pushing CH+/CH- button or
number keys on the Remote Control.
)
z The channel number is shown up in the
top-left corner of the screen.
z Check the Antenna and Power Cord
Connection if there is no channel program
display.