LTE Tracker Prime LS100 User Manual Revision: 1.00 Document Title Prime LS100 User manual Version Finale Date 1.
Contents 1 Introduction ................................................................................................................................... 3 2 Product Overview........................................................................................................................... 3 2.1 Appearance ......................................................................................................................... 3 2.2 Buttons Interface Description .....................................
1 Introduction Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency.
2.2 Buttons Interface Description Button /USB Interface Description KEY/interface Description Reset Key Power off the Prime LS100 Adapter Connected to a Power supply socket can power on Prime LS100 Function Key SOS mode Feature Key Play to do list audios.
2.3 LED Description Figure 1-2 There are 3 LED lights in Prime LS100 device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark Prime LS100 Base Station The LTE Base Station. Prime LS100 adapter It used to power on the Prime LS100. 3.2 Built-in Battery The following items are suggestion for built-in battery usage, please pay more attention. ◆ The device is Emergency call equipment, which is designed to be used by adapter always plugged. ◆ There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.
3.3 Prime LS100 Adapter Prime LS100 base station is connected with an AC Adapter. The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).
3.4 Power on/Power off Figure 2-2 Power on: ◆ Plug in the power adapter and power on. Power off: ◆ Unplugged the power adapter and press the Reset button. Note: the user can not power off Prime LS100 if the adapter is plugged. 4 Frequency LTE: Band2/Band4/Band5/Band12/Band13 WIFI::2412MHz-2462MHz BLE:2412MHz-2472MHz 433:433.
5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Unable to power off Prime LS100. The function of power key was disabled by AT+GTFKS.
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
