Installation manual

-79-
o Transmitter Out of Synch.
o Control system Transmitter Out of Synch.
o Supervision Loss
o Zone Trouble
o FM Jamming
• Arm [#6]
o Full Arm
o Part Arm
o Perimeter Arm
• Disarm [#7]
o Disarm
o Disarm after Alarm
• Water [#8]
o Zone Water Alarm (Flood)
To enable/disable the vocal message for an event group:
1. From the Programming menu, select Communications, VM Event Opt.
[956].
2. Select an event group.
3. Select Enabled or Disabled.